F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

233
Parameters
vd-name: Specifies the VD name, a case-insensitive string of 1 to 20 characters that contains no question
mark (?), less-than sign (<), greater-than sign (>), backward slash (\), quotation mark ("), percentage
sign (%), apostrophe ('), ampersand (&), or number sign (#).
vd-id: Specifies the VD ID.
The following matrix shows the value range for the vd-id argument on different firewalls and UTM
devices:
Hardware Value ran
g
e
F1000-A-EI/F1000-S-EI
F1000-A-EI: 1 to 128
F1000-S-EI: 1 to 64
F1000-E 1 to 256
F5000 1 to 256
Firewall module 1 to 256
U200-A 1 to 64
U200-S 1 to 4
Usage guidelines
You cannot delete the default VD, or change its name or ID.
When creating a VD on a device, you must specify a VD name and a VD ID that are respectively unique
on the device. To enter the view of an existing VD, you can specify the VD name, or specify both the VD
name and the VD ID. If you specify both the VD name and the VD ID, make sure the two arguments
identify the same VD.
Examples
# Create a VD with the name vdtest and the ID 2, and enter VD view.
<Sysname> system-view
[Sysname] vd test id 2
[Sysname-vd-test]