F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

277
Default command level
2: System level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display CWMP configuration after CWMP is enabled.
<Sysname> display cwmp configuration
TR-069 is enabled.
ACS URL :http://www.acs.com:80/acs
ACS username :newname
Inform enable status :disabled
Inform interval :600s
Inform time :none
Wait timeout :30s
Reconnection times :Unlimited
Source IP interface :none
Table 49 Command output
Field Descri
p
tion
TR-069 is Status of CWMP (TR-069), including enabled and disabled.
ACS URL URL of the ACS. It is displayed as null if not configured.
ACS username
Authentication username for connecting to the ACS. It is displayed
as null if not configured.
Inform enable status Enabled/disabled status of periodical sending of Inform messages.
Inform interval Interval between sending Inform messages.
Inform time
Date and time at which an Inform message will be sent. It is
displayed as null if not configured.
Wait timeout
Close-wait timer. It sets how long the connection to the ACS can be
idle before it is shut down. If no data has been transmitted over the
connection before the timer expires, the CPE disconnects the
connection to the ACS.
Reconnection times Number of attempts the CPE can make to retry a connection.
Source IP interface
Interface connecting to the ACS on the CPE. You can set this
interface with the cwmp cpe connect interface command.