F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

278
display cwmp status
Use display cwmp status to display the current status of CWMP.
Syntax
display cwmp status [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display CWMP status after CWMP is disabled.
<Sysname> display cwmp status
CWMP is disabled.
# Display CWMP status after CWMP is enabled.
<Sysname> display cwmp status
TR-069 is enabled.
ACS URL :http://www.acs.com:80/acs
ACS information is set by :user
ACS username :newname
Connection status :disconnected
Data transfer status :none
Time of last successful connection :none
Interval upon to next connection :1096832s
Table 50 Command output
Field Descri
p
tion
ACS URL URL of the ACS. It is displayed as null if not configured.
ACS information is set by
Mode through which CWMP gets the ACS URL. It is displayed as null if
ACS URL is not configured.
• user—The ACS URL is configured through CLI.
• config file—The ACS URL is configured through ACS.
• DHCP—The ACS URL is configured through DHCP.
ACS username
Authentication username for connecting to the ACS. It is displayed as null
if not configured.