F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

279
Field Descri
p
tion
Connection status
Connection status:
• connected—The connection is established.
• disconnected—The connection is not established.
• waiting response—The device is waiting for a response.
Data transfer status
Data transfer status:
• uploading—The device is uploading data.
• downloading—The device is downloading data.
• none—The device is not transferring data.
Time of last successful connection
Time at which the last successful connection was established. If there is
no successful connection, it is displayed as none.
Interval upon to next connection
Period of time after which the device will initiate a connection. If no
interval or time is configured for Inform message sending, it is displayed
as null.
ssl client-policy
Use ssl client-policy to specify an SSL client policy for the CPE to authenticate the ACS for setting up an
HTTPS connection.
Use undo ssl client-policy to remove the SSL client policy from the CWMP configuration.
Syntax
ssl client-policy policy-name
undo ssl client-policy
Default
No SSL client policy is specified.
View
CWMP view
Default level
2: System level
Parameters
policy-name: Specifies an SSL client policy name, a case-insensitive string of 1 to 16 characters. For
information about configuring SSL client policies, see Network Management Configuration Guide.
Usage guidelines
CWMP uses HTTP or HTTPS for data transmission. If the ACS uses HTTPS for secure access, its URL
begins with https://. You must configure an SSL client policy for the CPE to authenticate the ACS for
establishing an HTTPS connection.
Examples
# Specify the SSL client policy test for ACS authentication.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] ssl client-policy test