F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

37
execute
Use execute to execute the specified batch file.
Syntax
execute filename
Views
System view
Default command level
2: System level
Parameters
filename: Name of a batch file with the .bat extension. To change the extension of a configuration file
to .bat, use the rename command.
Usage guidelines
Batch files are command line files. Executing a batch file is to execute a set of command lines in the file.
Do not include invisible characters in a batch file. If an invisible character is found during the execution,
the batch process will abort and the commands that have been executed cannot be cancelled.
Not every command in a batch file is sure to be executed. For example, if a certain command is not
correctly configured, the command will not be executed, and the system skips this command and goes to
the next one.
Each configuration command in a batch file must be a standard configuration command, meaning that
the valid configuration information can be displayed with the display current-configuration command.
Examples
# Execute the batch file test.bat in the root directory.
<Sysname> system-view
[Sysname] execute test.bat
fdisk
Use fdisk to partition a storage medium.
Syntax
fdisk medium-name [ partition-number ]
Views
User view
Default command level
3: Manage level
Parameters
medium-name: Name of the storage medium to be partitioned. It cannot be the name of a partition.
partition-number: Number of partitions, in the range of 1 to 4. Extended partitioning is not supported.