F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

56
patch deactive
Use patch deactive to stop running patches.
Syntax
patch deactive [ patch-number ]
Views
System view
Default command level
3: Manage level
Parameters
patch-number: Specifies the sequence number of a patch. The value range is 1 to 200. If no sequence
number is specified, this command deactivates all ACTIVE patches. If a sequence number is specified,
this command deactivates the specified patch and all its subsequent ACTIVE patches.
Usage guidelines
This command is not applicable to patches in RUNNING state.
Examples
# Stop running patch 3 and all its subsequent ACTIVE patches.
<Sysname> system-view
[Sysname] patch deactive 3
# Stop running all ACTIVE patches.
<Sysname> system-view
[Sysname] patch deactive
patch delete
Use patch delete to remove patches from the patch memory area.
Syntax
patch delete [ patch-number ]
Views
System view
Default command level
3: Manage level
Parameters
patch-number: Specifies the sequence number of a patch. The value rang is 1 to 200. If no sequence
number is specified, this command removes all patches in the patch memory area. If a sequence number
is specified, this command removes the specified patch and all its subsequent patches.
Usage guidelines
This command does not delete patches from the storage medium. After being removed from the patch
memory area, the patches changes to the IDLE state.