Manualshelf

F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
61626364656667686970
60
Parameters
patch-number: Specifies the sequence number of a patch. The value range is 1 to 200. If no sequence
number is specified, this command confirms all ACTIVE patches and changes their state to RUNNING.
If a sequence number is specified, this command confirms the specified ACTIVE patch and all its previous
patches, and changes their state to RUNNING.
Usage guidelines
After being confirmed, ACTIVE patches are set in RUNNING state and can continue to run after a reboot.
If not being confirmed, ACTIVE patches are set in DEACTIVE state at a reboot.
Examples
# Confirm patch 3 and all its previous ACTIVE patches.
<Sysname> system-view
[Sysname] patch run 3
# Confirm all ACTIVE patches.
<Sysname> system-view
[Sysname] patch run