F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

71
Parameters
by-linenum: Identifies each line of displayed information with a line number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Use this command to verify that important settings have been saved to the next-startup configuration file.
If no next-startup configuration file has been specified, or the specified next-startup configuration does
not exist, this command displays the error message "The config file does not exist!".
Examples
# Display the next-startup configuration file.
<HP> display saved-configuration
#
version 5.20, Feature 3724
#
sysname HP
#
domain default enable system
#
telnet server enable
#
multicast routing-enable
#
vlan 1
#
vlan 999
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
interface NULL0
#
---- More ----
At the prompt of More, press Enter to display the next line, press Space to display the next screen of
configuration, or press Ctrl+C or any other key to stop displaying the configuration.
# Display the next-startup configuration file and number each line.
<HP> display saved-configuration by-linenum
1: #