F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Command Reference-6PW100

74
For some parameters that can be successfully configured even if their dependent features are not enabled,
this command displays their settings after the dependent features are enabled.
Executed in any user interface view, this command displays the running configuration of all user view
interfaces.
Executed in any VLAN view, this command displays the running configuration of all VLANs.
Examples
# Display the running configuration on interface GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] display this
#
interface GigabitEthernet0/1
port link-mode bridge
port link-type hybrid
undo port hybrid vlan 1
port hybrid vlan 2 to 4 untagged
port hybrid pvid vlan 2
#
return
# Display the running configuration on user interfaces.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] display this
#
user-interface con 0
user-interface vty 0
history-command max-size 256
user-interface vty 1 4
#
return
reset saved-configuration
Use reset saved-configuration to delete next-startup configuration files.
Syntax
reset saved-configuration
Views
User view
Default command level
3: Manage level
Usage guidelines
Delete the next-startup configuration file if it does not match the software version or has been corrupted.
Use this command with caution. This command permanently deletes the next-startup configuration file.