F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

91
Figure 33 Viewing user logging statistics
213BClearing user logs and user logging statistics
1. Select Log Report > Userlog from the navigation tree to enter the page as shown in 800HFigure 32.
2. Click the Statistics expansion button on the page to display the information as shown in 801HFigure 33.
3. Click Reset.
The system clears all user logging statistics for the device and user logs in the cache.
71B
Configuring user logging at the CLI
At the CLI, user logging is also known as "flow logging."
214BUser logging configuration task list
Task Remarks
802H
Configuring the user logging version Optional.
803H
Configuring the source address for user logging packets Optional.
804H
Exporting user logs
805H
Exporting user logs to log servers
Required.
Use either approach.
806H
Exporting user logs to the information center
215BConfiguring the user logging version
Configure the user logging version according to the receiver capability. A receiver cannot resolve user
logs correctly if it does not support the version of the user logs.
To configure the user logging version:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A