F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

93
To export user logs to an IPv4 log server:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the IPv4 address
and UDP port number of the
log server.
userlog flow export [ vpn-instance
vpn-instance-name ] host
ipv4-address udp-port
Not configured by default.
To export user logs to an IPv6 log server:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the IPv6 address
and UDP port number of the
log server.
userlog flow export [ vpn-instance
vpn-instance-name ] host ipv6
ipv6-address udp-port
Not configured by default.
The following matrix shows the feature and hardware compatibility:
Hardware Ex
p
ortin
g
user lo
g
s to an IPv6 lo
g
server
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
400BExporting user logs to the information center
Exporting user logs to the information center occupies device storage space, so use this export approach
only if there are a small amount of logs. User logs exported to the information center have a severity level
of informational.
To export user logs to the information center:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Export user logs to the
information center.
userlog flow syslog
User logs are exported to the log
server by default.