F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

96
Task Remarks
810H
Setting session logging
thresholds
Required.
Configure the time threshold or/and traffic threshold for session logging.
By default, both the time threshold and traffic threshold are 0, meaning that
no session logging entries are output.
IMPORTANT:
If both the time threshold and traffic threshold are configured, a log entry is
output for the session when it reaches whichever threshold and the statistics of
the session will be cleared.
222BConfiguring a session logging policy
1. Select Log Report > Session Log > Log Policy from the navigation tree to display existing session
logging policies, as shown in
811HFigure 35.
Figure 35 Session logging policy list
2. Click Add to enter the session logging policy configuration page, as shown in 812HFigure 36.
Figure 36 Creating a session logging policy
3. Configure a session logging policy as described in 813HTable 19.
4. Click Apply.
Table 19 Configuration items
Item Descri
p
tion
Source Zone Specify the source zone and destination zone.
You can configure an optional security zone on the page entered by selecting
System > Zone.
Destination Zone