F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

99
Severity level Description Value
Information Informational information to be recorded. 6
Debug Debug information. 7
Note: A smaller value represents a higher severity level.
225BDisplaying connection limit logs
Select Log Report > Report > Connection Limit Log from the navigation tree to enter the page as shown
in
819HFigure 39. 820HTable 23 describes the configuration items.
Figure 39 Connection limit log configuration page
Table 23 Configuration items
Item Descri
p
tion
Time/Date Time when the connection limit log was generated.
Type
Type of the traffic alarm—The number of source IP-based connections exceeds the
upper limit or the number of destination IP-based connections exceeds the upper
limit.
Source Zone Source zone of the connection.
Source IP Source IP address of the connection.
Destination Zone Destination zone of the connection.
Destination IP Destination IP address of the connection.
Current Rate Rate of the current connection.
Current Connection Total number of the current connections.
TCP Percentage Percentage of TCP packets to the total packets.
UDP Percentage Percentage of UDP packets to the total packets.
ICMP Percentage Percentage of ICMP packets to the total packets.