F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

139
Figure 59 Network diagram
442BConfiguration procedure
# Configure the RMON statistics group on the RMON agent to gather statistics for GigabitEthernet 0/1.
<Firewall> system-view
[Firewall] interface gigabitethernet 0/1
[Firewall-GigabitEthernet0/1] rmon statistics 1 owner user1
# Display statistics collected by the RMON agent for GigabitEthernet 0/1.
<Firewall> display rmon statistics gigabitethernet 0/1
EtherStatsEntry 1 owned by user1-rmon is VALID.
Interface : Gigabitethernet0/1<ifIndex.3>
etherStatsOctets : 21657 , etherStatsPkts : 307
etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 235 , 65-127 : 67 , 128-255 : 4
256-511: 1 , 512-1023: 0 , 1024-1518: 0
# On the configuration terminal, get the traffic statistics through SNMP. (Details not shown.)
88B
History group configuration example
443BNetwork requirements
Configure the RMON history group on the firewall (the RMON agent) in 857HFigure 60 to gather periodical
traffic statistics for GigabitEthernet 0/1 every one minute.
Figure 60 Network diagram