F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

169
459BDisabling first-time authentication
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Disable first-time
authentication.
undo ssh client first-time Enabled by default.
3. Configure the server host
public key.
See "
884H
Configuring a client's host
public key"
The method for configuring the
server host public key on the client
is similar to that for configuring
client public key on the server.
4. Specify the host public key
name of the server.
ssh client authentication server
server assign publickey keyname
N/A
284BEstablishing a connection to an Stelnet server
The following matrix shows the feature and hardware compatibility:
Hardware Feature com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
You can launch the Stelnet client to establish a connection to an Stelnet server, and specify the public key
algorithm, the preferred encryption algorithm, the preferred HMAC algorithm, and the preferred key
exchange algorithm.
To establish a connection to an Stelnet server: