F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

170
Task Command Remarks
Establish a connection
to an Stelnet server.
• Establish a connection to an IPv4 server:
{ In non-FIPS mode:
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress { zlib | zlib-openssh } |
prefer-ctos-cipher { 3des | aes128 | aes256 |des } |
prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 }
| prefer-kex { dh-group-exchange | dh-group1 |
dh-group14 } | prefer-stoc-cipher { 3des | aes128 |
aes256 |des } | prefer-stoc-hmac { md5 | md5-96 |
sha1 | sha1-96 } ] *
{ In FIPS mode:
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key rsa |
prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex
dh-group14 | prefer-stoc-cipher { aes128 | aes256 } |
prefer-stoc-hmac { sha1 | sha1-96 } ] *
• Establish a connection to an IPv6 server:
{ In non-FIPS mode:
ssh2 ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress { zlib | zlib-openssh }
|prefer-ctos-cipher { 3des | aes128 | aes256 | des } |
prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 }
| prefer-kex { dh-group-exchange | dh-group1 |
dh-group14 } | prefer-stoc-cipher { 3des | aes128 |
aes256 | des } | prefer-stoc-hmac { md5 | md5-96 |
sha1 | sha1-96 } ] *
{ In FIPS mode:
ssh2 ipv6 server [ port-number ] [ identity-key rsa |
prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex
dh-group14 | prefer-stoc-cipher { aes128 | aes256 } |
prefer-stoc-hmac { sha1 | sha1-96 } ] *
Use either command in
user view.
NOTE:
Support for the ssh2
ipv6 command depends
on the device model.
103B
Configuring the device as an SFTP client
This section describes how to configure the device as an SFTP client.
285BSFTP client configuration task list
Task Remarks
885H
Specifying a source IP address or source interface for the SFTP client Optional.
886H
Enabling and disabling first-time authentication Optional.
887H
Establishing a connection to an SFTP server Required.
888H
Working with SFTP directories Optional.
889H
Working with SFTP files Optional.