F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

9
Figure 6 Trace route configuration page
3. Enter the IP address or host name of the destination device in the Trace Route field,
4. Click Start.
5. View the result in the Summary box, as shown in 723HFigure 7.
Figure 7 Trace route operation result
140BConfiguring tracert at the CLI
348BPrerequisites
Before you use a tracert command, perform the tasks in this section.
For an IPv4 network: