F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

182
[Firewall] ssh user client002 service-type stelnet authentication-type publickey
assign publickey ClientKey
3. Establish a connection to the Stelnet server:
a. Launch PuTTY.exe on the Stelnet client to enter the following interface.
b. In the Host Name (or IP address) field, enter the IP address of the Stelnet server 192.168.1.40.
Figure 79 Specifying the host name (or IP address)
c. Select Connection > SSH > Auth from the navigation tree.
d. Click Browse… to bring up the file selection window, navigate to the private key file
(private.ppk) and click OK.