F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

183
Figure 80 Specifying the private key file
e. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username. After
entering the username (client002), you can enter the command-line interface of the server.
296BWhen the firewall acts as an Stelnet client for password
authentication
465BNetwork requirements
As shown in 901HFigure 81, you can log in to the router through the Stelnet client running on the firewall. The
router acts as the Stelnet server and uses password authentication. The username and password of the
client are saved on the router.
Figure 81 Network diagram
466BConfiguration procedure
1. Configure the Stelnet server:
# Generate the RSA key pairs.
<Router> system-view
[Router] public-key local create rsa