F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module

191

192

193

194

195

196

197

198

199

200

184

The range of public key size is (512 ~ 2048).

NOTES: If the key modulus is greater than 512,

It will take a few minutes.

Press CTRL+C to abort.

Input the bits of the modulus[default = 1024]:

Generating Keys...

++++++++

++++++++++++++

+++++

++++++++

# Generate a DSA key pair.

[Router] public-key local create dsa

The range of public key size is (512 ~ 2048).

NOTES: If the key modulus is greater than 512,

It will take a few minutes.

Press CTRL+C to abort.

Input the bits of the modulus[default = 1024]:

Generating Keys...

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

+++++++++++++++++++++++++++++++++++

# Enable the SSH server function.

[Router] ssh server enable

# Configure an IP address for interface GigabitEthernet 0/1, which the Stelnet client will use as the

destination address of the SSH connection.

[Router] interface gigabitethernet 0/1

[Router-GigabitEthernet0/1] ip address 192.168.1.40 255.255.255.0

[Router-GigabitEthernet0/1] quit

# Set the authentication mode for the user interface to AAA.

[Router] user-interface vty 0 4

[Router-ui-vty0-4] authentication-mode scheme

# Enable the user interface to support SSH.

[Router-ui-vty0-4] protocol inbound ssh

[Router-ui-vty0-4] quit

# Create local user client001, with the password as aabbcc and service type as ssh.

[Router] local-user client001

[Router-luser-client001] password simple aabbcc

[Router-luser-client001] service-type ssh

[Router-luser-client001] quit

# (Optional.) Specify the service type for user client001 as stelnet, and the authentication method

as password.

[Router] ssh user client001 service-type stelnet authentication-type password

2. Establish a connection to the Stelnet server:

# Configure an IP address for interface GigabitEthernet 0/1.

<Firewall> system-view

[Firewall] interface gigabitethernet 0/1

[Firewall-GigabitEthernet0/1] ip address 192.168.1.56 255.255.255.0

[Firewall-GigabitEthernet0/1] quit