F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

204
Figure 96 Creating VD_B
a. Enter the VD ID 3.
b. Enter the VD name VD_B.
c. Set the maximum number of sessions to 100000.
d. Set the maximum number of real service groups for load balancing to 0.
e. Set the maximum number of real services for load balancing to 0.
f. Set the maximum number of virtual services for load balancing to 0.
g. Click Apply.
3. Assign interfaces to the VDs:
a. Select Device Management > Virtual Device > Interface from the navigation tree.
b. Select VD_A for GigabitEthernet 1/1, and select VD_B for GigabitEthernet 1/2.
c. Click Apply.
Figure 97 Assigning interfaces to VD_A and VD_B
4. Assign VLANs to VD_A:
a. Select Device Management > VD > VLAN from the navigation tree.