F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

234
18BConfiguring host traffic statistics
Host traffic statistics can be configured only in the Web interface.
127B
Feature and hardware compatibility
Hardware Virtual firewall com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E No
F5000 No
Firewall module No
U200-A Yes
U200-S Yes
128B
Overview
The host traffic statistics module monitors the traffic of hosts in a LAN, and sends statistics reports in the
syslog format to the specified log host. From the log information, the administrator can get the number
and bytes of service-specific packets sent/received by each host.
To collect statistics for a service, you need to reference the corresponding service resource. The
unspecified network services are taken as one statistics item.
129B
Recommended configuration procedure
Before you configure host traffic statistics, complete the following tasks:
• Specify the IP address of the log host. For more information, see "Managing logs."
• Specify the service resource. For more information, see Access Control Configuration Guide.
Ste
p
Remarks
1. 943HSpecifying a service type.
Optional.
Specify the service type for which you want to enable statistics.
You can specify at most 15 service types. If you do not configure
service type, all the host traffic is taken as one service type for
statistics.
By default, no service type is specified.
2. 944HConfiguring basic host traffic
statistics functions.
Required.
Enable the host traffic statistics function and configure the statistics
interval.
By default, the host traffic statistics function is disabled.