F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

28
Task Command
Change the current working directory. cd { directory | .. | / }
169BCreating a directory
Perform this task in user view.
Task Command
Create a directory. mkdir directory
170BRemoving a directory
To remove a directory, you must delete all files and subdirectories in this directory. To delete a file, use the
delete command. To delete a subdirectory, use the rmdir command.
Removing a directory permanently deletes all its files in the recycle bin, if any.
Perform this task in user view.
Task Command
Remove a directory. rmdir directory
37B
Managing storage media
Storage media management includes space assignment and space partitioning.
171BManaging storage medium space
CAUTION:
A
fter a storage medium is formatted, all files on it are erased and cannot be restored. If a startup
configuration file exists on the storage medium, formatting the storage medium results in loss of the startup
configuration file.
If part of a storage medium is inaccessible, use the fixdisk command to examine the medium for any
damage and repair the medium.
To format a storage medium that has been partitioned, you must format all the partitions individually,
instead of formatting the medium as a whole.
To manage the space of a storage medium, perform one of the following tasks in user view:
Task Command Remarks
Repair a storage
medium.
fixdisk medium-name N/A
Format a storage
medium.
format medium-name [ FAT16 | FAT32 ]
The FAT16 and FAT32 keywords are not
supported on the Flash.