F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

Figure 13 Software upgrade configuration page

2. Configure upgrade parameters as described in 730HTable 6.

3. Click Apply.

Table 6 Configuration items

Item Descri

tion

File

Specify the filename of the local system software image file, which must have the

extension .app or .bin.

File Type

Specify the type of the next-startup system software image:

• Main—The main system software image has higher priority than the backup

system software image at startup.

• Backup–Used at startup if the main system software image is unavailable.

If a file with the same

name already exists,

overwrite it without any

prompt

Specify whether to overwrite the file with the same name.

If you do not select the option, when a file with the same name exists, the system

does not upgrade the software but displays an error message: "The file has

existed."

Reboot after the

upgrade is finished

Specify whether to reboot the device to make the upgraded software take effect

after the system software image is uploaded.

175BUpgrading system software at the CLI

Step Command Remarks

1. Use FTP or TFTP to transfer the

system software image to the

root directory of the storage

medium.

See "Configuring FTP" or

"Configuring TFTP."

The image file must be saved in the

root directory for a successful

upgrade.

If the storage medium has been

partitioned, save the image file to

the root directory of the first

partition.

2. Specify the file as the startup

system software image in user

view.

boot-loader file file-url { main |

backup }

N/A