F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

38
IMPORTANT:
Patch state information is saved in the patchstate file on the storage medium. To make sure the device can
identify the patches, do not edit, delete, move the file, or change the file name.
Figure 14 Impact of patch manipulation commands on patch state
363BIDLE state
Patches that have not been loaded are in IDLE state. You cannot install or run these patches. As shown
in
732HFigure 15, the patch memory area can load up to eight patches.
The patch memory area supports up to 200 patches.
Figure 15 Patches that are not loaded to the patch memory area
364BDEACTIVE state
Patches in DEACTIVE state have been loaded to the patch memory area but have not yet run in the system.
Suppose that the patch file you are loading has seven patches. After the seven patches successfully pass
