F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

39
the version check and CRC check, they are loaded to the patch memory area and are in DEACTIVE state.
In the patch memory area, patch states are as shown in
733HFigure 16.
Figure 16 Patch states in the patch memory area after a patch file is loaded
365BACTIVE state
Patches in ACTIVE state run temporarily in the system and become DEACTIVE at a reboot. For the seven
patches in
734HFigure 16, if you activate the first five patches, their states change from DEACTIVE to
ACTIVE.
735HFigure 17 shows the patch states in the system.
The patches that are in ACTIVE state change to the DEACTIVE state at a reboot.
Figure 17 Patches are activated
366BRUNNING state
After you confirm ACTIVE patches, their states change to RUNNING and persist after a reboot. In
contrast to ACTIVE patches, RUNNING patches continue to take effect after a reboot. For example, if you
confirm the first three patches in
736HFigure 17, their state changes from ACTIVE to RUNNING, and the
RUNNING state persists after a reboot.
737HFigure 18 shows the patch states in the system.