F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices System Management and Maintenance Configuration Guide-6PW100

65
Task Remarks
767H
Outputting system information to the trap buffer Optional.
768H
Outputting system information to the log buffer Optional.
769H
Outputting system information to the SNMP module Optional.
770H
Outputting system information to the Web interface Optional.
771H
Saving system information to a log file Optional.
772H
Managing security logs and the security log file Optional.
773H
Enabling synchronous information output Optional.
774H
Disabling an interface from generating link up/down logging information Optional.
Configurations for the information output destinations function independently.
55B
Outputting system information to the console
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Enable the information center.
info-center enable
Optional.
Enabled by default.
3. Specify a name for a channel
identified by its number.
info-center channel
channel-number name
channel-name
Optional.
See
775H
Table 8 for default channel
names.
4. Configure an output channel
for the console.
info-center console channel
{ channel-number |
channel-name }
Optional.
By default, system information is
output to the console through
channel 0 (console).
5. Configure an output rule for
the console.
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional.
See "
776H
Default output rules of system
information."
6. Configure the timestamp
format.
info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional.
By default, the timestamp format
for log, trap and debug
information is date.
7. Return to user view. quit N/A
8. Enable system information
output to the console.
terminal monitor
Optional.
The default setting is enabled.