F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

5
Views
Tunnel interface view
Default command level
2: System level
Parameters
tunnel number: Specifies a backup interface. The number argument indicates the number of the tunnel
interface.
Usage guidelines
This command is available only for P2MP GRE tunnel interfaces.
The backup interface to be specified must exist and be a GRE over IPv4 tunnel interface.
The following matrix shows the gre p2mp backup-interface command and firewalls and UTM devices
compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
Examples
# Specify interface Tunnel100 as the backup interface of the P2MP GRE tunnel interface Tunnel0.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] gre p2mp backup-interface tunnel 100
gre p2mp branch-network-mask
Use gre p2mp branch-network-mask to configure the mask or mask length of the private network
addresses of a branch in tunnel entries.
Use undo gre p2mp branch-network-mask to restore the default.
Syntax
gre p2mp branch-network-mask { mask | mask-length }
undo gre p2mp branch-network-mask
Default
The mask of the private network addresses of a branch is 255.255.255.255, and the mask length is 32.
Views
Tunnel interface view