F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

122
Examples
# Configure the device to initiate L2TP tunneling requests to LNS 202.1.1.1 for users in domain
aabbcc.net.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] start l2tp ip 202.1.1.1 domain aabbcc.net
tunnel authentication
Use tunnel authentication to enable the L2TP tunnel authentication function.
Use undo tunnel authentication to disable the L2TP tunnel authentication function.
Syntax
tunnel authentication
undo tunnel authentication
Default
L2TP tunnel authentication is enabled.
Views
L2TP group view
Default command level
2: System level
Usage guidelines
Generally, authentication is required at both ends of a tunnel for the sake of security. However, you can
disable the authentication when you check network connectivity or you have to receive tunneling requests
from unknown tunnel peers.
Examples
# Disable L2TP tunnel authentication.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] undo tunnel authentication
tunnel avp-hidden
Use tunnel avp-hidden to specify to transfer AVP data in hidden mode.
Use undo tunnel avp-hidden to restore the default.
Syntax
tunnel avp-hidden
undo tunnel avp-hidden
Default
AVP data is transferred over the tunnel in plain text mode.
Views
L2TP group view