F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

123
Default command level
2: System level
Usage guidelines
The tunnel avp-hidden command is available for only LACs.
Examples
# Transfer AVP data in hidden mode.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel avp-hidden
tunnel flow-control
Use tunnel flow-control to enable the L2TP tunnel flow control function.
Use undo tunnel flow-control to disable the L2TP tunnel flow control function.
Syntax
tunnel flow-control
undo tunnel flow-control
Default
The L2TP tunnel flow control function is disabled.
Views
L2TP group view
Default command level
2: System level
Examples
# Enable the L2TP tunnel flow control function.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel flow-control
tunnel name
Use tunnel name to specify the name of a tunnel at the local end.
Use undo tunnel name to restore the default.
Syntax
tunnel name name
undo tunnel name
Default
A tunnel takes the system name of the device as its name at the local end.
Views
L2TP group view