F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

150
# Configure a SHA1 fingerprint for verifying the validity of the CA root certificate.
[Sysname-pki-domain-1] root-certificate fingerprint sha1
D1526110AAD7527FB093ED7FC037B0B3CDDDAD93
rule (PKI CERT ACP view)
Use rule to create a certificate attribute access control rule.
Use undo rule to delete one or all access control rules.
Syntax
rule [ id ] { deny | permit } group-name
undo rule { id | all }
Default
No access control rule exists.
Views
PKI certificate access control policy view
Default command level
2: System level
Parameters
id: Number of the certificate attribute access control rule, in the range of 1 to 16. The default is the
smallest unused number in this range.
deny: Indicates that a certificate whose attributes match an attribute rule in the specified attribute group
is considered invalid and denied.
permit: Indicates that a certificate whose attributes match an attribute rule in the specified attribute group
is considered valid and permitted.
group-name: Name of the certificate attribute group to be associated with the rule, a case-insensitive
string of 1 to 16 characters. It cannot be "a", "al", or "all".
all: Specifies all access control rules.
Usage guidelines
A certificate attribute group must exist to be associated with a rule.
Examples
# Create an access control rule, specifying that a certificate is considered valid when it matches an
attribute rule in the certificate attribute group mygroup.
<Sysname> system-view
[Sysname] pki certificate access-control-policy mypolicy
[Sysname-pki-cert-acp-mypolicy] rule 1 permit mygroup
state
Use state to specify the name of the state or province where an entity resides.
Use undo state to remove the configuration.