F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

165
AFT configuration commands
NOTE:
A
FT is not supported on VLAN interfaces and does not support VPN instances.
The following matrix shows the feature and hardware compatibility:
Hardware AFT com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
Firewall module Yes
U200-A No
U200-S No
display aft address-group
Use display aft address-group to display the AFT address pool configuration information.
Syntax
display aft address-group [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the AFT address pool configuration information.
<Sysname> display aft address-group
IPv4 Address Pool Information:
1 : from 1.1.1.1 to 1.1.1.4