F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

166
Table 31 Command output
Field Descri
p
tion
1 Address pool number of the AFT.
from 1.1.1.1 Start IP address in an address pool.
to 1.1.1.4 End IP address in an address pool.
display aft address-mapping
Use display aft address-mapping to display IPv6-to-IPv4 AFT address mappings.
Syntax
display aft address-mapping [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The command output does not include port translation information.
Examples
# Display 6to4 AFT address mappings.
<Sysname> display aft address-mapping
Address Mappings (V6toV4):
IPv4 Address IPv6 Address
6.6.6.10 0006::0002
Table 32 Command output
Field Descri
p
tion
Address Mappings (V6toV4) IPv6-to-IPv4 address mapping information.
display aft all
Use display aft all to display all AFT information, including information about AFT address pool, address
translation, and AFT statistics.