F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

169
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display AFT statistics.
<Sysname> display aft statistics
Statistics:
Total Sessions: 0
Expired Sessions: 0
Hits: 0
Misses: 0
Total Address Mappings: 0
Enabled Interfaces:
GigabitEthernet0/1
Table 34 Command output
Field Descri
p
tion
Total Sessions Total number of AFT sessions.
Expired Sessions Number of expired AFT sessions.
Hits Number of successful attempts to match a packet with an AFT session.
Misses Number of failed attempts to match a packet with an AFT session.
Total Address Mappings Total number of address mappings.
Enabled Interfaces Interfaces on which AFT is enabled.
Related commands
reset aft statistics
aft address-group
Use aft address-group to create an AFT address pool.
Use undo aft address-group to delete a specific AFT address pool.
Syntax
aft address-group group-number start-ipv4-address end-ipv4-address
undo aft address-group group-number