F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

11
Default command level
2: System level
Parameters
text: Description for the interface, a string of 1 to 80 characters.
Examples
# Configure the description for the interface Tunnel 1 as tunnel1.
<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] description tunnel1
Related commands
display interface tunnel
destination
Use destination to specify the destination address for a tunnel interface.
Use undo destination to remove the configured tunnel destination address.
Syntax
destination { ip-address | ipv6-address }
undo destination
Default
No tunnel destination address is configured.
Views
Tunnel interface view
Default command level
2: System level
Parameters
ip-address: Tunnel destination IPv4 address.
ipv6-address: Tunnel destination IPv6 address.
The following matrix shows the values for the ipv6-address argument on different firewalls and UTM
devices:
Hardware i
pv
6-address
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No