F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

197
Views
Tunnel interface view
Default command level
2: System level
Parameters
time-interval: Quiet period of a DVPN tunnel, in the range of 10 to 600 seconds.
Usage guidelines
During the quiet period, the DVPN tunnel is in the sleep state and no tunnel connection exists.
Examples
# Set the quiet period of the DVPN tunnel to 100 seconds.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] dvpn session dumb-time 100
Related commands
• interface tunnel
• tunnel-protocol
dvpn session idle-time
Use dvpn session idle-time to set the idle timeout of a spoke-spoke DVPN tunnel. If no data is transferred
along a spoke-spoke tunnel during this interval, the tunnel will be removed automatically.
Use undo dvpn session idle-time to restore the default.
Syntax
dvpn session idle-time time-interval
undo dvpn session idle-time
Default
The idle timeout for a spoke-spoke DVPN tunnel is 600 seconds.
Views
Tunnel interface view
Default command level
2: System level
Parameters
time-interval: Idle timeout for a spoke-spoke tunnel, in the range of 60 to 65535 seconds.
Usage guidelines
This setting must be the same for all VAM clients in a VPN domain.
Examples
# Set the idle timeout for a spoke-spoke DVPN tunnel to 800 seconds.
<Sysname> system-view
[Sysname] interface tunnel 0