F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

14
0 output error
Table 2 Command output
Field Descri
p
tion
Tunnel0 current state
Physical state of the tunnel interface:
• Administratively DOWN—The interface has been shut down by the
shutdown command.
• DOWN—The interface is administratively up but its physical state is
down.
• UP—Both the administrative and physical states of the interface are up.
Line protocol current state
Link layer state of the tunnel interface:
• DOWN—The protocol state of the interface is down.
• UP—The protocol state of the interface is up.
Description Description of the tunnel interface.
Maximum Transmit Unit MTU of the tunnel interface.
Internet Address
IP address of the tunnel interface.
If no IP address is assigned to the interface, "Internet protocol processing :
disabled" is displayed, which means that the tunnel interface cannot process
packets.
Primary indicates it is the primary IP address of the interface. Sub indicates
it is a secondary IP address of the interface.
Encapsulation is TUNNEL The encapsulation protocol is tunnel.
service-loopback-group ID
ID of the service loopback group referenced by the tunnel.
If service loopback group is not supported or not specified,
"service-loopback-group ID not set" is displayed.
Tunnel source Source address of the tunnel.
destination Destination address of the tunnel.
Tunnel bandwidth Bandwidth of the tunnel interface.
Tunnel protocol/transport
Tunnel mode and transport protocol:
• GRE/IP—GRE over IPv4 tunnel mode.
• GRE/IPv6—GRE over IPv6 tunnel mode.
• GRE p2mp/IP—Point-to-multipoint GRE tunnel mode.
• IPsec/IP—IPsec over IPv4 tunnel mode.
• IPsec/IPv6—IPsec over IPv6 tunnel mode.
• IP/IP—IPv4 over IPv4 tunnel mode.
• IP/IPv6—IPv4 over IPv6 tunnel mode.
• IP/IPv6 dslite-aftr—IPv4 over IPv6 DS-lite tunnel mode on the AFTR.
• IP/IPv6 dslite-cpe—IPv4 over IPv6 DS-lite tunnel mode on the CPE.
• IPv6/IP—IPv6 over IPv4 manual tunnel mode.
• IPv6/IP 6to4—IPv6 over IPv4 6to4 tunnel mode.
• IPv6/IP auto-tunnel—Automatic IPv6 over IPv4 tunnel mode.
• IPv6/IP ISATAP—IPv6 over IPv4 ISATAP tunnel mode.
• IPv6/IPv6—IPv6 over IPv6 tunnel mode.
GRE key disabled Tunnel interface key option of GRE is not configured.