F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

16
Field Descri
p
tion
Protocol: (s) - spoofing
(s) indicates that the network layer protocol state is UP, but the link is not
available because it is either an on-demand link or not present at all.
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The link is physically up.
• DOWN—The link is physically down.
• ADM—The link has been administratively shut down. To bring it up,
perform the undo shutdown command.
• Stby—The interface is a backup interface.
Protocol
Protocol state:
• DOWN—The protocol is disabled.
• UP—The protocol is enabled.
Main IP Primary IP address of the interface.
Description Description of the interface.
Cause
Cause of a DOWN physical link. If the port has been shut down with the
shutdown command, this field displays Administratively. To bring up the
port, use the undo shutdown command.
Related commands
• interface tunnel
• source
• destination
• tunnel-protocol
display ipv6 interface tunnel
Use display ipv6 interface tunnel to display IPv6 information for tunnel interfaces.
Syntax
display ipv6 interface tunnel [ number ] [ brief ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
number: Displays IPv6 information on a specific tunnel interface. If no interface number is specified, IPv6
information about all tunnel interfaces is displayed.
brief: Displays brief information about tunnel interfaces. If this keyword is not specified, detailed
information and IPv6 packet statistics for tunnel interfaces are displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.