F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

23
shutdown
Use shutdown to shut down a tunnel interface.
Use undo shutdown to bring up a tunnel interface.
Syntax
shutdown
undo shutdown
Default
A tunnel interface is in the up state.
Views
Tunnel interface view
Default command level
2: System level
Examples
# Shut down interface Tunnel 1.
<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] shutdown
source
Use source to specify the source address or source interface for the tunnel interface.
Use undo source to restore the default.
Syntax
source { ip-address | ipv6-address | interface-type interface-number }
undo source
Default
No source address or source interface is specified for the tunnel interface.
Views
Tunnel interface view
Default command level
2: System level
Parameters
ip-address: Tunnel source IPv4 address.
ipv6-address: Tunnel source IPv6 address.
The following matrix shows the values for the ipv6-address argument on different firewalls and UTM
devices: