F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

tunnel-protocol

Use tunnel-protocol to specify the tunnel mode for the tunnel interface.

Use undo tunnel-protocol to restore the default.

Syntax

tunnel-protocol { dvpn { gre | udp } | gre [ ipv6 | p2mp ] | ipsec { ipv4 | ipv6 } | ipv4-ipv4 | ipv4-ipv6

[ dslite-aftr | dslite-cpe ] | ipv6-ipv4 [ 6to4 | auto-tunnel | isatap ] | ipv6-ipv6 }

undo tunnel-protocol

Default

The tunnel mode is GRE over IPv4 tunnel mode.

Views

Tunnel interface view

Default command level

2: System level

Parameters

dvpn gre: Specifies the DVPN GRE tunnel mode.

The following matrix shows the values for the dvpn gre keyword on different firewalls and UTM devices:

Hardware Ke

word com

atibilit

F1000-A-EI/F1000-S-EI No

F1000-E Yes

F5000 Yes

Firewall module Yes

U200-A No

U200-S No

dvpn udp: Specifies the DVPN UDP tunnel mode.

The following matrix shows the values for the dvpn udp keyword on different firewalls and UTM devices: