F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

37
• dh
• sa duration
display ike sa
Use display ike sa to display information about the current IKE SAs.
Syntax
display ike sa [ active | standby | verbose [ connection-id connection-id | remote-address
remote-address ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
active: Displays the summary of active IKE SAs in an IPsec stateful failover scenario.
standby: Displays the summary of standby IKE SAs in an IPsec stateful failover scenario.
The following matrix shows the active and standby keywords and firewalls and UTM devices
compatibility:
Hardware Ke
y
words com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
verbose: Displays detailed information.
connection-id connection-id: Displays detailed information about IKE SAs by connection ID, in the range
1 to 2000000000.
remote: Displays detailed information about IKE SAs with a specified remote address.
ip-address: Remote address.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.