F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

52
[Sysname-ike-peer-peer1] local-name localgw
Related commands
• remote-name
• id-type
nat traversal
Use nat traversal to enable the NAT traversal function of IKE/IPsec.
Use undo nat traversal to disable the NAT traversal function of IKE/IPsec.
Syntax
nat traversal
undo nat traversal
Default
The NAT traversal function is disabled.
Views
IKE peer view
Default command level
2: System level
Examples
# Enable the NAT traversal function for IKE peer peer1.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] nat traversal
peer
Use peer to set the subnet type of the peer security gateway for IKE negotiation.
Use undo peer to restore the default.
Syntax
peer { multi-subnet | single-subnet }
undo peer
Default
The subnet is a single one.
Views
IKE peer view
Default command level
2: System level
Parameters
multi-subnet: Sets the subnet type to multiple.