F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

56
Views
IKE peer view
Default command level
2: System level
Parameters
name: Name of the peer security gateway for IKE negotiation, a string of 1 to 32 characters.
Usage guidelines
If you configure the id-type name or id-type user-fqdn command on the initiator, the IKE negotiation
initiator sends its security gateway name as its ID for IKE negotiation, and the peer uses the security
gateway name configured with the remote-name command to authenticate the initiator. Make sure the
local gateway name matches the remote gateway name configured on the peer.
Related commands
• id-type
• local-name
• ike local-name
Examples
# Configure the remote security gateway name as apple for IKE peer peer1.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] remote-name apple
reset ike sa
Use reset ike sa to clear IKE SAs.
Syntax
reset ike sa [ connection-id | active | standby ]
Views
User view
Default command level
2: System level
Parameters
connection-id: Connection ID of the IKE SA to be cleared, in the range 1 to 2000000000.
active: Clears all active IKE SAs in an IPsec stateful failover scenario.
standby: Clears all standby ISAKMP SAs in an IPsec stateful failover scenario.
The following matrix shows the keyword and firewall compatibility:
The following matrix shows the active and standby keywords and firewalls and UTM devices
compatibility:
Hardware Ke
y
words com
p
atible
F1000-A-EI/F1000-S-EI Yes