F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

75
queue is full: 0
authentication has failed: 0
wrong length: 0
replay packet: 0
packet too long: 0
wrong SA: 0
# Display IPsec packet statistics for Tunnel 3.
<Sysname> display ipsec statistics tunnel-id 3
------------------------------------------------
Connection ID : 3
------------------------------------------------
the security packet statistics:
input/output security packets: 5124/8231
input/output security bytes: 52348/64356
input/output dropped security packets: 0/0
dropped security packet detail:
not enough memory: 0
queue is full: 0
authentication has failed: 0
wrong length: 0
replay packet: 0
packet too long: 0
wrong SA: 0
Table 18 Command output
Field Descri
p
tion
Connection ID ID of the tunnel.
input/output security packets Counts of inbound and outbound IPsec protected packets.
input/output security bytes Counts of inbound and outbound IPsec protected bytes.
input/output dropped security packets
Counts of inbound and outbound IPsec protected packets that are
discarded by the device.
dropped security packet detail
Detailed information about inbound/outbound packets that get
dropped.
not enough memory Number of packets dropped due to lack of memory.
can't find SA Number of packets dropped due to finding no security association.
queue is full Number of packets dropped due to full queues.
authentication has failed Number of packets dropped due to authentication failure.
wrong length Number of packets dropped due to wrong packet length.
replay packet Number of packets replayed.
packet too long Number of packets dropped due to excessive packet length.
wrong SA Number of packets dropped due to improper SA.
Related commands
reset ipsec statistics