F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

display ipsec transform-set

Use display ipsec transform-set to display information about IPsec transform sets.

Syntax

display ipsec transform-set [ transform-set-name ] [ | { begin | exclude | include } regular-expression ]

Views

Any view

Default command level

1: Monitor level

Parameters

transform-set-name: Name of an IPsec transform set, a string of 1 to 32 characters. If you do not specify

an IPsec transform set, the command displays information about all IPsec transform sets.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see Getting Started Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Usage guidelines

If you do not specify any parameters, the command displays information about all IPsec transform sets.

Examples

# Display information about all IPsec transform sets.

<Sysname> display ipsec transform-set

IPsec transform-set name: tran1

encapsulation mode: tunnel

ESN : disable

ESN scheme: NO

transform: esp-new

ESP protocol:

Integrity: md5-hmac-96

Encryption: des