F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

77
Table 19 Command output
Field Descri
p
tion
IPsec transform-set name Name of the IPsec transform set.
encapsulation mode Encapsulation mode used by the IPsec transform set, transport or tunnel.
ESN Whether the ESN function is enabled.
ESN scheme
• NO—Supports the ESN function.
• YES—Does not support the ESN function.
transform
Security protocols used by the IPsec transform set: AH, ESP, or both. If both
protocols are configured, IPsec uses ESP before AH.
AH protocol Authentication algorithm used by AH.
ESP protocol Authentication algorithm and encryption algorithm used by ESP.
Related commands
ipsec transform-set
display ipsec tunnel
Use display ipsec tunnel to display information about IPsec tunnels.
Syntax
display ipsec tunnel [ active | standby ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
active: Displays information about the active IPsec tunnels in an IPsec stateful failover scenario.
standby: Displays information about the standby IPsec tunnels in an IPsec stateful failover scenario.
The following matrix shows the keywords active, and standby and firewalls and UTM compatibility:
Hardware Ke
y
words com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.