F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Command Reference-6PW100

88
Related commands
display ipsec policy template
ipsec profile (system view)
Use ipsec profile to create an IPsec profile and enter its view. An IPsec profile defines the IPsec transform
sets to be used to protect the data and the IKE negotiation parameters used to set up the SAs.
Use undo ipsec profile to delete an IPsec profile.
Syntax
ipsec profile profile-name
undo ipsec profile profile-name
Default
No IPsec profile exists.
Views
System view
Default command level
2: System level
Parameters
profile-name: Specifies a name for the IPsec profile, a case-insensitive string of 1 to 15 characters that
cannot contain hyphens (-).
Usage guidelines
IPsec profiles can be applied to DVPN tunnel interfaces and IPsec tunnel interfaces.
For information about DVPN tunnel interfaces and the hardware compatibility for DVPN, see VPN
Configuration Guide.
Examples
# Create IPsec profile profile1 and enter its view.
<Sysname> system-view
[Sysname] ipsec profile profile1
[Sysname-ipsec-profile-profile1]
Related commands
• ipsec profile (tunnel interface view)
• display ipsec profile
ipsec profile (tunnel interface view)
Use ipsec profile to apply an IPsec profile to a DVPN tunnel interface or an IPsec tunnel interface.
Use undo ipsec profile to remove the application.
Syntax
ipsec profile profile-name
undo ipsec profile