F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

163
c. Enter the peer name peer, select the negotiation mode Main, enter the remote gateway IP
address 2.2.3.1, and select the Pre-Shared Key box and then enter abcde for both the Key and
Confirm Key fields.
d. Click Apply.
Figure 123 Configuring an IKE peer
5. Configure an IPsec policy:
a. Select VPN > IPSec > Policy from the navigation tree.
b. Click Add to enter the IPsec policy configuration page.
c. Enter the policy name map1 and the sequence number 10, select the IKE peer peer, select the
IPsec proposal tran1 and click <<, enter the ACL number 3101, select Enable for RRI, and enter
the next hop address 2.2.2.2.
d. Click Apply.