F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

204
Figure 132 Network diagram
468BAssigning IP addresses to interfaces
Assign IP addresses to the interfaces on the firewalls according to 809HFigure 132. (Details not shown.)
469BConfiguring Firewall A
1. Configure stateful failover:
• Log in to the Web interface of Firewall A, and then select High Reliability > Stateful Failover from
the navigation tree to enter the Stateful Failover Configuration page.
• Click the Modify Backup Interface button.
• Add GigabitEthernet 0/3 to the Backup Interface(s) list, as shown in
810HFigure 133.
• Click Apply to return to the Stateful Failover Configuration page.
• Select stateful failover configuration options as shown in
811HFigure 134.
Firewall A
Backup link
Host B
IP:10.2.2.2/24
Gateway:10.2.2.1
Firewall B
GE0/3
GE0/3
Host A
IP:10.1.1.2/24
Gateway:10.1.1.1
Branch
Headquarters
Virtual IP address 1:
10.1.1.1/24
Virtual IP address 2:
192.168.0.1/24
GE0/2
192.168.0.5/24
GE0/1
10.1.1.10/24
GE0/2
192.168.0.6/24
GE0/1
10.1.1.20/24
Firewall C
GE0/1
192.168.0.2./24
GE0/2
10.2.2.1/24