F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices VPN Configuration Guide-6PW100

236
Figure 159 Adding an ISP domain
2. Configure the ISP domain name, authentication/authorization/accounting methods, and
maximum number of users, as described in
838HTable 23.
3. Click Apply.
Table 23 Configuration items
Item Descri
p
tion
ISP Domain Specify the name of the ISP domain.
Authentication
Methods
Primary
Server Type
Select the authentication server type for PPP users.
• None—All users are trusted and no authentication is
performed. This method is not recommended.
• Local—Uses local authentication.
• RADIUS—Uses RADIUS authentication.
• HWTACACS—Uses HWTACACS authentication.
• If you do not select any authentication method, the default
authentication method of the ISP domain is used, which is
Local by default.
Scheme
Scheme for the primary authentication method, which is
displayed when you select HWTACACS or RADIUS as the
server type. The scheme is always system.
Backup Specify whether to enable the backup authentication method.
Authorization
Methods
Primary Server Type
Select the authorization server type for PPP users.
• None—No authorization exchange is performed. Every user
is trusted and has the corresponding default rights of the
system.
• Local—Uses local authorization.
• RADIUS—Uses RADIUS authorization.
• HWTACACS—Uses HWTACACS authorization.
• If you do not select any authorization method, the default
authorization method of the ISP domain is used, which is
Local by default.